Bucking Unit, Breakout Unit & Premium Connection Technical Guides
Practical, field-tested technical content from Galip Equipment’s engineering team. The articles below cover bucking unit operation, torque-turn capture, premium connection make-up (VAM, TenarisHydril, Hunting, FOX, TMK, JFE), breakout unit safety, drilling motor testing, and the workshop QA workflows that keep premium-thread programs auditable. Written for supervisors, QA managers, operators and buyers specifying oilfield make-up equipment.
Technical Articles, Guides, and Field Notes
Browse recent technical articles, product guidance, and field notes covering premium connections, torque systems, drilling tools, and trenchless operations.
Tricone Bit Types: What the IADC Code Tells You Before You OrderRead any tricone bit's IADC code in four parts, match it to the interval, and use the dull grade so the next…Read Article 
Third-Party Torque Turning: What the Service Covers, What the Report Must Prove, and When to Bring It In-HouseWhat third-party torque turning delivers, the fields a defensible torque-turn report must show, how to vet a crew, and the point where…Read Article 
API 5B: Thread Gauging, Standoff and Gauge ControlAPI 5B is the API specification for threading, gauging and thread inspection of casing, tubing and line pipe threads. It defines the…Read Article 
API 5CT: Grades, Connections and What a Shop Must CheckAPI 5CT is the American Petroleum Institute specification for casing and tubing. It sets the steel grades, dimensions, tolerances, testing and marking…Read Article 
Iron Roughneck Guide: Operation, Calibration and LimitsAn iron roughneck makes up and breaks out drill pipe on the rig floor. Learn how it works, how torque is calibrated…Read Article 
Power Tong Guide: How It Works, Torque and Buying LimitsA power tong makes up and breaks out casing, tubing and drill pipe. Learn how torque is calculated, how backups work and…Read Article 
Hardbanding Drill Pipe: Materials, Casing Wear and RepairHardbanding drill pipe protects tool joints but can damage casing. Compare materials, welding controls, band height, wear signs and reapplication rules.Read Article 
Drilling Stabilizer Guide: Gauge, Blades, Wear and RebuildsLearn how to specify a drilling stabilizer by gauge, blade geometry, junk slot area and hardfacing, then inspect wear and decide when…Read Article 
Bottom Hole Assembly Design: Build, Hold and Drop BHAsBottom hole assembly design explained: compare build, hold and drop BHAs, check stabilizer gauge, place drilling jars and record every connection.Read Article 
Drill Collar: Weight on Bit, Slick vs Spiral and SizingA drill collar supplies weight on bit in compression so the pipe above stays in tension. How to size the collar string,…Read Article 
Tool Joint: Connection Types, Sizes and Wear LimitsA tool joint is a rotary shouldered connection: the shoulder seals, the threads hold. NC designations and their older names, the dimensions…Read Article 
Pipe Ovality: How to Measure an Out-of-Round EndPipe ovality is shape, not size. A joint can pass diameter tolerance and still be too oval to make up. How to…Read Article Keep the Research Flow Moving
Use the archive to continue comparing equipment, reviewing technical guidance, or moving into a direct inquiry.
Read more articles
Keep exploring the archive when you need more maintenance guidance, QA references, or application-specific detail.
Compare equipment lines
Move into the product catalog when the article has already narrowed the likely equipment class.
Open the inquiry path
Use the contact route once the reader has enough context to send specifications or request a quotation.